USS Colorado (SSN-788) comes back from its first deployment minus part of its skin

conan · 2020-02-26T18:12:22.057Z

Well that’s what I thought as well but it’s some kind of rubberized spray they put on that sticks to materials of sub.

It’s that expansion and retraction that causing to to peel off specially the highly ionized steel with salt water.

That one article said tile but pictures that Safiel posted looks more like a spray on.

Again it looks like the tile mate in this picture from wiki is pealing. You can see it in upper right hand corner. Click on picture to enlarge.

3000×2400 1.5 MB

Maybe @Samm can explain better but IMO what you need is two materials that ca expand and retract independent from each other. Again just thinking out loud.

Samm · 2020-02-26T22:02:39.851Z

Safiel:

WildRose:

I hate to break it to you Saf but humans are flawed and there will be mistakes made in every human endeavor.

They’ll figure out what went wrong, fix it and hopefully avoid similar problems in the future.

This isn’t a simple mistake.

These people are a bunch of ******* crooks.

Then again, perhaps the manufacturer of the coating and contractor who applied it followed the specifications to a tee and that it was the design of the product and specifications that were flawed.

WildRose · 2020-02-26T22:36:22.240Z

Not that out to lunch. I was thinking last night of a way to use something akin to heat shrink tubing with adhesive that would give a uniform bond and body for the length of the boat.

WildRose · 2020-02-26T22:37:00.347Z

No, they are necessary when you are building the most complex machines on earth. We already know what’s in it.

WildRose · 2020-02-26T22:38:12.501Z

I’m sure he was there bright and early signing up this morning too.

WildRose · 2020-02-26T22:38:57.098Z

As the article points out it’s a common issue and not just with US sub’s.

Striker840 · 2020-02-26T22:39:41.508Z

I could ask my daughter what she has heard. She is in Sonar, then again she probably couldn’t tell me squat…lol

WildRose · 2020-02-26T22:39:52.407Z

“Alleged”. A we don’t know that it’s true and B even if it is whether the falsifications had anything to do with this issue.

WildRose · 2020-02-26T22:41:29.914Z

If she’s on sub’s she’s got more guts than I do. I had two rides on them and found it disconcerting as all get out to be below the surface in a steel coffin. First and only time in my life I knew what it was like to be claustrophobic.

Striker840 · 2020-02-26T22:48:45.736Z

She isn’t on a sub, she hunts them…lol
Currently she is at San Diego learning the new Sonar gear and E6 (First Class Petty Officer) school then off to wherever the Navy sends her. She will be on @Safiel’s favorite LCS class.

WildRose · 2020-02-26T22:49:46.991Z

You deserve to be a proud dad. It takes guts to go to sea.

AlexMcAlpine · 2020-02-26T23:16:00.395Z

WildRose:

As the article points out it’s a common issue and not just with US sub’s.

But the fact that our subcontractor was falsifying tests to show that our security coating actually worked when it actually didnt… this does not concern you?

AlexMcAlpine · 2020-02-26T23:17:53.912Z

WildRose:

“Alleged”. A we don’t know that it’s true and B even if it is whether the falsifications had anything to do with this issue.

The falsifications have everything to do with this issue.

Our Navy put them on the sub thinking they’d work, thanks to those falsifications and they didn’t work.

That’s a lot of money down the toilet.

AlexMcAlpine · 2020-02-26T23:19:20.442Z

WildRose:

We already know what’s in it.

But we don’t know how it will work…in particular the coating that doesn’t have a workable adhesive.

Would the boat have gone to sea if they’d known that the adhesives were going to peel off like that? Or would the Navy have worked with the contractor to get them to get working adhesive before they’d gone out?

WildRose · 2020-02-26T23:19:30.294Z

“Alleged”. We know the coating works from the numerous sub hunting exercises our own Navy does.

WildRose · 2020-02-26T23:20:33.848Z

What percentage was lost? Since it’s only a small patch we know the adhesive does work. Apparently there may have been a workmanship issue on that part of the skin.

Striker840 · 2020-02-26T23:37:21.094Z

Thanks and yes I am VERY proud of her

TheRedComet · 2020-02-27T00:02:58.099Z

Thank her for her service for me.

I regret not joining almost every day.

WildRose · 2020-02-27T00:05:05.508Z

I’ve never felt as old and useless as I did in the days following 9-11 when I realized I couldn’t get back in.

FloridaYankee · 2020-02-27T00:10:00.906Z

Safiel:

westaussie:

Since you posted this in the Politics section I presume you are implying that there is a degree of incompetence and/or indolence by those in charge of that department. What step(s) do you think should be taken?

It is not the incompetence of any particular set of persons, rather it is long running institutional incompetence.

George Bush was still President when this particular boat was ordered. Most of her construction took place during the Obama administration. Trump was President during the final stages of construction and her commissioning. So both parties have shared power and many officials have come and gone. Congress has changed hands between parties.

The incompetence transcends any one party.

And due to the political structure, it may be unstoppable. Congress feeds the defense industry. The defense industry feeds Congressmen with campaign donations. And voters like defense jobs in their districts.

Trying to solve this issue is going to be extremely difficult, if not impossible.

This is HIGHLY unscrupulous and hard to believe it’s even legal.